1-805-484-2992
Quotes - Engineering - SalesAT156X
Mueller| Product | Style | Ratings | Configuration |
|---|---|---|---|
| Heat Exchanger | Plate & Frame | 350 PSI / 410°F | B Frame |
Download Datasheet
Note: the unit pictured is representative of the standard build and may not exactly depict p/n AT156X as shown on this page.
AT156X specifications
Description
AT156X is the X-series plate configuration of the Mueller Accu-Therm AT156 frame. It is a distinct part from the base AT156: the frame and port geometry are shared, but the plate pressing is not, so an X plate and a base plate are not interchangeable in a pack and their gaskets differ. The X plate is the clip-in gasket series for this frame - the plate carries a glue-free clip-on gasket rather than a bonded one, so a re-gasket does not require stripping and curing adhesive. Mueller catalogs X-series gaskets separately (75X, 156X). Mueller does not publish what the X designator itself stands for. Frame geometry is unchanged - 87-1/2" by 34-1/2" plates on 8" ports, packs from 50-3/4" - 176-3/4", roughly 240 - 5,600 sq ft of surface at about 8.8 square feet per plate, and water flow to 3200 GPM. Gaskets attach by the Clip-In method. Frame styles offered: B Frame - for larger units, plates hang from the upper guide bar; capacity to 900 plates. If you are matching a nameplate, the series letter is part of the part number and needs to carry through to any plate or gasket order.
Product Overview
Part Number:
AT156X
Series:
Accu-Therm
Brand:
Mueller
Codes & Compliance:
ASME Sec VIII Div 1, CRN, DNV
Also Written:
AT 156X, AT-156X, AT156 X, AT156-X
Configuration & Size
Surface Area (Sq/Ft):
240 - 5,600 sq ft
Connection Type:
Studded port standard; lap-joint, weld-neck, ferrule, Victaulic
Frame Type:
B | B Frame (Beam)
Max Plate Count:
635 (est.)
Mounting:
Floor mounted frame
Passes:
Single pass standard; multi-pass available
Plate Height:
87-1/2"
Plate Pack Length Range:
50-3/4" - 176-3/4"
Plate Pattern:
X series, chevron H / V
Plate Thickness:
0.5 mm standard
Plate Width:
34-1/2"
Port Size:
8"
Wall Construction:
Single wall gasketed
Heat Transfer Area per Plate (Sq/Ft):
8.8 (est.)
Max Flow Rate (GPM):
3200
Performance Rating:
U-value 1,500 BTU/hr-ft²-°F and greater
Performance Rating (Basis):
Clean water-to-water service; 1F to 3F approach. Actual duty depends on plate count, pattern, and fluid properties.
Materials of Construction
- Frame: Painted carbon steel; stainless optional. Zinc-plated compression bolts
- Gasket: NBR or EPDM standard; High-Temp EPDM, Viton/FKM, Butyl. FDA/3-A
- Gasket Attachment: Clip-In
- Plate: 316 SS standard; 304 SS, Titanium, Hastelloy C-276, SMO 254 optional
Rating
- Max Temperature: 410°F design; 302°F - 329°F gasket limit
- Max Working Pressure: 350 PSI design
- Min Temperature: -20°F (MDMT 32°F typical)
- Test Pressure: 1.3 x MAWP
