1-805-484-2992
Quotes - Engineering - SalesAT10-SAN
Mueller| Product | Style | Ratings | Configuration |
|---|---|---|---|
| Heat Exchanger | Plate & Frame | 150 PSI / 302°F | Sanitary, Tri-Clamp |
Download Datasheet
Note: the unit pictured is representative of the standard build and may not exactly depict p/n AT10-SAN as shown on this page.
AT10-SAN specifications
Description
AT10-SAN is the sanitary configuration of the Mueller Accu-Therm AT10 plate heat exchanger, built for product-contact service in dairy, food, beverage, and brewing plants. Mueller holds 3-A Sanitary Standards authorization for plate-type heat exchangers, and the unit is supplied with clamp-type sanitary ferrule connections, FDA and 3-A compliant NBR or EPDM gaskets, and a CIP-capable plate pack that also breaks down for inspection. The frame measures 37.1" by 10.9" with port centers at 27.1" and 4.6" and 2" ports, and it handles up to 200 GPM. Intermediate divider sections let a single frame carry regeneration, heating, and cooling stages in sequence, which is how HTST pasteurizers, wort coolers, and juice processing skids are typically configured. Plates are 316 stainless as standard, with titanium available for chloride-bearing product. Frame arrangement: Sanitary configuration, frame style per selection.
Product Overview
Part Number:
AT10-SAN
Series:
Accu-Therm Sanitary
Brand:
Mueller
Codes & Compliance:
3-A Sanitary, FDA gaskets, ASME Sec VIII Div 1
Also Written:
AT 10-SAN, AT-10-SAN
Configuration & Size
Surface Area (Sq/Ft):
13 - 273 sq ft
Connection Type:
Sanitary ferrule / tri-clamp; S-line, Q-line, Victaulic
Frame Type:
-SAN | Sanitary configuration, frame style per selection
Passes:
Multi-pass with divider sections
Plate Height:
37.1"
Plate Pack Length Range:
14-1/2" - 50-1/2"
Plate Pattern:
Chevron H / V (10F / 10H / 10V)
Plate Thickness:
0.5 mm
Plate Width:
10.9"
Port Size:
2"
Wall Construction:
Single wall gasketed, sanitary
Heat Transfer Area per Plate (Sq/Ft):
1.56 (est.)
Max Flow Rate (GPM):
200
Performance Rating:
1°F to 3°F approach; U-values 1,500 BTU/hr-ft²-°F and greater
Performance Rating (Basis):
Clean product-to-water service; regeneration efficiency depends on section arrangement
Materials of Construction
- Frame: Painted carbon steel or 304 SS; stainless hanger
- Gasket: NBR or EPDM (FDA, 3-A) 302°F; EPDM High-Temp 329°F
- Gasket Attachment: Glue-In
- Plate: 316 SS standard; 304 SS, titanium optional
- Surface Finish: Sanitary polish, CIP capable (Ra not published by Mueller)
Rating
- Max Temperature: 302°F (FDA gaskets) / 329°F (high-temp EPDM)
- Max Working Pressure: 150 PSI sanitary service
- Min Temperature: 32°F
