1-805-484-2992
Quotes - Engineering - SalesAT1306
Mueller| Product | Style | Ratings | Configuration |
|---|---|---|---|
| Heat Exchanger | Plate & Frame | 350 PSI / 410°F | B Frame |
Download Datasheet
Note: the unit pictured is representative of the standard build and may not exactly depict p/n AT1306 as shown on this page.
AT1306 specifications
Description
This AT1306 Accu-Therm unit is the gasketed plate-and-frame configuration Mueller builds on the 1306 plate. Plate dimensions are 84-3/4" by 43", ports are 10" / 12", and the pack length adjusts across 50-3/4" - 176-3/4" to place roughly 262 - 6,209 sq ft of surface into service. Figure about 12.7 square feet per plate and up to 6600 GPM on water. Compared with a shell and tube of the same duty, the plate pack occupies a fraction of the floor space and can be reconfigured by adding or removing plates rather than replacing the exchanger. Gaskets use the Loc-In method. Frame styles offered: B Frame - for larger units, plates hang from the upper guide bar; capacity to 900 plates.
Product Overview
Part Number:
AT1306
Series:
Accu-Therm
Brand:
Mueller
Codes & Compliance:
ASME Sec VIII Div 1, CRN, DNV
Also Written:
AT 1306, AT-1306
Configuration & Size
Surface Area (Sq/Ft):
262 - 6,209 sq ft
Connection Type:
Studded port standard; lap-joint, weld-neck, ferrule, Victaulic
Frame Type:
B | B Frame (Beam)
Max Plate Count:
490 (est.)
Mounting:
Floor mounted frame
Passes:
Single pass standard; multi-pass available
Plate Height:
84-3/4"
Plate Pack Length Range:
50-3/4" - 176-3/4"
Plate Pattern:
Chevron H / V / combination (1306M)
Plate Thickness:
0.5 mm standard
Plate Width:
43"
Port Size:
10" / 12"
Wall Construction:
Single wall gasketed
Heat Transfer Area per Plate (Sq/Ft):
12.7 (est.)
Max Flow Rate (GPM):
6600
Performance Rating:
U-value 1,500 BTU/hr-ft²-°F and greater
Performance Rating (Basis):
Clean water-to-water service; 1°F to 3°F approach. Actual duty depends on plate count, pattern, and fluid properties.
Materials of Construction
- Frame: Painted carbon steel; stainless optional. Zinc-plated compression bolts
- Gasket: NBR or EPDM standard; High-Temp EPDM, Viton/FKM, Butyl. FDA/3-A
- Gasket Attachment: Loc-In
- Plate: 316 SS standard; 304 SS, Titanium, Hastelloy C-276, SMO 254 optional
Rating
- Max Temperature: 410°F design; 302°F - 329°F gasket limit
- Max Working Pressure: 350 PSI design
- Min Temperature: -20°F (MDMT 32°F typical)
- Test Pressure: 1.3 x MAWP
