1-805-484-2992
Quotes - Engineering - SalesAT10-FRAME
Mueller| Product | Style | Ratings | Configuration |
|---|---|---|---|
| Replacement Parts | Frame | 350 PSI | AT10 Frame Assembly |
Download Datasheet
Note: the unit pictured is representative of the standard build and may not exactly depict p/n AT10-FRAME as shown on this page.
AT10-FRAME specifications
Description
The AT10 frame assembly is the structural half of a Mueller Accu-Therm plate heat exchanger: fixed head, movable follower, upper and lower guide bars, support column, and the compression bolt set that clamps the plate pack. End frames are SA-515-70 or SA-516-70 carbon steel with a corrosion-resistant paint finish, the plate hanger is 304 stainless, and compression bolts are zinc-plated SA-193-B7 with SA-194-2H nuts. Frame styles offered on this size are C Frame (Cantilever), F Frame (Intermediate). Ports are 2", studded as standard and fully lineable, with lap-joint, weld-neck, sanitary ferrule, and Victaulic alternatives that can be mixed on one frame. Pack length adjusts across 14-1/2" - 50-1/2", so surface can be added later by extending the pack rather than replacing the exchanger. OSHA-approved plate pack shrouds are available in aluminum or stainless.
Product Overview
Part Number:
AT10-FRAME
Series:
Accu-Therm Frame
Brand:
Mueller
Codes & Compliance:
ASME Sec VIII Div 1, CRN
Also Written:
AT 10-FRAME, AT-10-FRAME
Configuration & Size
Fits Frame:
AT10
Part Type:
Frame assembly (head, follower, guide bars, tie bolts)
Connection Type:
Studded port standard; lap-joint, weld-neck, ferrule, Victaulic
Frame Type:
C, F | C Frame (Cantilever), F Frame (Intermediate)
Max Plate Count:
175 (est.)
Plate Pack Length Range:
14-1/2" - 50-1/2"
Port Size:
2"
Materials of Construction
- Frame: Painted carbon steel; stainless optional. Zinc-plated compression bolts
Rating
- Max Working Pressure: 350 PSI design
