1-805-484-2992
Quotes - Engineering - SalesAT40-FRAME
Mueller| Product | Style | Ratings | Configuration |
|---|---|---|---|
| Replacement Parts | Frame | 350 PSI | AT40 Frame Assembly |
Download Datasheet
Note: the unit pictured is representative of the standard build and may not exactly depict p/n AT40-FRAME as shown on this page.
AT40-FRAME specifications
Description
The AT40 frame assembly is the structural half of a Mueller Accu-Therm plate heat exchanger: fixed head, movable follower, upper and lower guide bars, support column, and the compression bolt set that clamps the plate pack. End frames are SA-515-70 or SA-516-70 carbon steel with a corrosion-resistant paint finish, the plate hanger is 304 stainless, and compression bolts are zinc-plated SA-193-B7 with SA-194-2H nuts. Frame styles offered on this size are F Frame (Intermediate), B Frame (Beam). Ports are 4", studded as standard and fully lineable, with lap-joint, weld-neck, sanitary ferrule, and Victaulic alternatives that can be mixed on one frame. Pack length adjusts across 33-7/8" - 159-7/8", so surface can be added later by extending the pack rather than replacing the exchanger. OSHA-approved plate pack shrouds are available in aluminum or stainless.
Product Overview
Part Number:
AT40-FRAME
Series:
Accu-Therm Frame
Brand:
Mueller
Codes & Compliance:
ASME Sec VIII Div 1, CRN
Also Written:
AT 40-FRAME, AT-40-FRAME
Configuration & Size
Fits Frame:
AT40
Part Type:
Frame assembly (head, follower, guide bars, tie bolts)
Connection Type:
Studded port standard; lap-joint, weld-neck, ferrule, Victaulic
Frame Type:
F, B | F Frame (Intermediate), B Frame (Beam)
Max Plate Count:
545 (est.)
Plate Pack Length Range:
33-7/8" - 159-7/8"
Port Size:
4"
Materials of Construction
- Frame: Painted carbon steel; stainless optional. Zinc-plated compression bolts
Rating
- Max Working Pressure: 350 PSI design
